EasyManua.ls Logo

CESVA DC112 - Batteries and External Supply; Dimensions and Weight; Calibration; Standards

CESVA DC112
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DC112d/DC112
User’s manual
33
6.15 Batteries and external supply
Battery
One 6LF22 type 9 volt battery
Typical battery life with continuous use:
The typical battery life with the display lit may be reduced by
up to 50% with respect to the previous value
20 hours
External Supply
By USB port
6.16 Dimensions and weight
Dimensions: 144 x 82 x 23 mm
Weight: With battery 361 g
Without battery 320 g
6.17 Calibration
Use the CB004 or CB006 calibrator and consult section 2.2.3.
6.18 Standards
Standards
UNE-EN 61252:1998/A1:2003; UNE-EN 61260:1997/A1:2002
EN 61252:1995/A1:2001; EN 61260:1995/A1:2001
IEC 61252:2002 ; IEC 61260:1995/A1:2001
DIRECTIVE 2003/10/CE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
6 February 2003 on the minimum requirements for the health and safety related to the
exposure of workers to risks derived from physical agents (noise)
mark. Complies with 73/23/CEE and CEM 89/336/CEE low-tension regulations, the
latter amended by 93/68/CEE.
as manufacturer of electric or electronic equipment
gives notice that the product you have purchased was put on the market later than 13
August 2005 and complies with 2002/96/CE and 2003/108/CE directives on Waste from
Electrical and Electronic Equipment (WEEE).
In addition, the product is marked with the following symbol, which indicates
that it is subject to separate collection.

Table of Contents