EasyManua.ls Logo

CF MOTO CF250 - Driving Preparation; Shifting Gears

CF MOTO CF250
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-
41 -
Driving Preparation
●
Che
ck if the side stand is fully up.
●
Gri
p
the clutch lever.
●
Shift into 1st
gear.
● Apply the throttle grip a little,
and release the clutch lever very slowly.
●
When the clutch
starts to engage, apply the throttle a little more, give the engine enough fuel to keep it from
stalling.
WARN
ING
This motorc
ycle is equipped with a side stand switch. Engine cann't start when the
transmission does not in NEUTRAL and the side stand is not down.
Sh
if
ting Gears
●
Release
the throttle while pulling the clutch lever.
●
Use shift pedal
for shifting gears.
DANGE
R
Reduce engi
ne speed first when shift gears. Otherwise, engine could be damaged or the rear
wheel may skid and cause accidents. Shifting should be done below 5,000r/min (rpm).