-
47 -
NOTE
Follow
the below structions to protect catalytic converter.
1. Only use unleaded gasoline. Enven only small amounts of lead can stain your precious metals
in catalytic converters causing catalytic converter failure.
2. Do not add antirust oil or engine oil into muffler which may result in catalytic converter failure.
Fuel Evaporation Sy
stem
Please contact CFMOTO dealer when fuel evaporation system failed. Don’t modify the fuel evaporation system.
Tube connection should be well connected without air leakage, blocking, squeezing, broken and damage etc.
after repair.
Fuel steam from fuel tank will be released into carbon tank through absorption tube. Absorbing fuel steam by
active carbon when engine stops; Fuel steam of carbon tank will flow into combustor and burn when engine
works, avoiding environment pollution in case of fuel stem released into air directly. Meanwhile, air pressure of
fuel tank should be balanced by absorption tube. If inner pressure of fuel tank is lower than outside, it is available
to replenish air pressure by air tube of carbon tank or absorption tube. So, tube system should be smooth
running without blocking and squeezing, otherwise fuel pump will be damaged, fuel tank will also be deformed or
broken.
To Next Page
Loading...
