for battery stability.
The installed location shall be restricted access or installed in a cabinet which provides
protection for pets and children.
5.3.1.2 Ground installation
Meanwhile, CFE-Residential ESS Lithium-ion Battery also could be installed on floor. The
installation steps are as follows:
1. Fix the holders to battery’s mounting holes one by
one.
2. If more power and energy are needed, 2 to 4
batteries could be installed in one stack.
3. If the number of batteries remains at the range of
5 to 8, a cabinet is recommended to be selected.
5.3.2 Address selection of Master and Slave Battery (Batteries) connection
To Next Page
Loading...
