11
ASSEMBLY AND USE
• Make certain that your hands are free of oil, grease, and other contaminants.
• Inspect the unit to insure that it has a manufacturer-specified seal washer in good working
condition attached to the inlet nozzle.
• Secure the cylinder in an upright position.
• Inspect the post valve of the cylinder and the EVOLUTION
TM
conserver to ensure they are free
of contaminants. If any indication of damage or contamination is detected, DO NOT use the
equipment and contact your Home Care Provider.
WARNING! Use ONLY a manufacturer-specified seal washer. Other seal washers may not be
oxygen compatible and may cause an oxygen leak, creating an increased fire risk. Do not use the
device if the manufacturer-specified seal washer is missing. Contact your Home Care Provider for
assistance.
NON-PORTABLE USE:
The EVOLUTION
TM
conserver is designed to extend the life of portable oxygen supplies when
away from the primary source. While the EVOLUTION
TM
conserver may be used with stationary
oxygen cylinders, it should only be used while awake and reasonably attentive. The EVOLUTION
TM
conserver is not intended for use during sleep because, in the unlikely event of operational
malfunction or dislodging of the cannula, the user could be unaware and not make the necessary
corrections.
To Next Page
Loading...
