12
INSTALLING ALKALINE BATTERIES
The EVOLUTION
TM
conserver uses advanced technology that prolongs battery life through efficient
power use. With normal use of four (4) hours per day at any setting, your batteries should last a
minimum of 2 years.
Two (2) AA alkaline batteries are packaged in the box with your EVOLUTION
TM
conserver. Follow
these easy steps to install them:
STEP 1: While holding the unit in one hand, gently press down on the battery door with your
thumb and open the hinge door away from the EVOLUTION™ label. [Fig E1 and E2]
STEP 2: Drop the batteries into the slot, making sure they are inserted in the proper direction as
indicated by the (+) and (-) symbols. [Figs E3]
STEP 3: Rotate the door cover back in place until a “click” is heard.
ASSEMBLY AND USE
FIGURE E1 FIGURE E2 FIGURE E3
Changing
Alkaline
Batteries
☛
NOTE: The EVOLUTION
TM
conserver is packaged with batteries inside. A special seal is used at the positive
terminal to prevent battery oxidation. If it has not already been removed by your Home Care Provider, be
sure to remove the seal before using the unit for the first time.
To Next Page
Loading...