51
Settings
GB
Accessing the settings - adjustment - problem identication me-
nus
The boiler can be used to manage the heating and domestic hot water
production system in its entirety.
Navigation within the menus enables the boiler system + connected
peripheral units to be customised, optimising operation for maximum
comfort and maximum saving. It also provides important information
relating to the efficient operation of the boiler.
The following menus are available:
The parameters relating to each individual menu are listed in the
following pages.
The various parameters are accessed and modied using the MENU
button and encoder 3.
The menu descriptions and dierent parameters will be shown on the
display.
The number of the corresponding parameter menus is indicated at
point A on the display. A note in area B will usually appear. (see g.
below).
C.H. Temp.adjusting knob) Enables the set values to be increased
or decreased
Menu/Ok
ButtOn
Encoder
Point A
Point B
0 Time-Date-Language - See manual user
0 0 Set Display Language
0 1 Set Time-Date
0 2 Legal Hour Setting
1 Set Timer - See manual user
2 Boiler Parameter
2 1 Service code (234)
2 2 General setting
2 3 C.H Parameters - Part 1
2 4 C.H Parameters - Part 2
2 5 Domestic Hot Water
2 9 Menù 2 Reset to factory setting
3 Solar & Storage
3 0 General setting
3 1 Service code (234)
3 2 Special setting
4 Zone 1 Parameters
4 0 Set-point Zone 1
4 1 Service code (234)
4 2 Zone 1 Setting
4 3 Diagnostics
4 4 Zone device mangement
5 Zone 2 Parameters
5 0 Set-point Zone 2
5 1 Service code (234)
5 2 Zone 2 Setting
5 3 Diagnostics
5 4 Zone device mangement
5 5 Multizone
7 Test & Utilities
8 Service Parameters
8 1 Service code (234)
8 2 Boiler
8 3 Boiler Temperature
8 4 Solar & Storage
8 5 Service
8 6 Statistics
8 7 NO ACTIVE
8 8 Error History
8 9 Data Assistance Center
To Next Page
Loading...
Need help?
General
