To Next PageTo Next Page
Need help?Do you have a question about the CHAFFOTEAUX PIGMA Series and is the answer not in the manual?
General| Heat Exchanger Material | Stainless Steel |
|---|---|
| Modulation Range | 1:7 |
| Category | Boiler |
| Type | Condensing |
| Fuel Type | Natural Gas / LPG |
| Installation | Wall Mounted |
General safety rules and warnings for installation and use of the boiler.
Requirements for connecting the flue gas discharge system safely and correctly.
Guidelines for safe and proper electrical connections to the boiler.
Instructions for securely mounting the boiler onto the wall bracket.
Safety precautions and guidelines for making electrical connections to the boiler.
Essential steps before boiler operation, including safety checks.
Explanation of the boiler's display symbols, codes, and status indicators.
Step-by-step guide for initiating the boiler's start-up sequence.
Detailed procedure for the initial start-up and safety checks.
How to perform the deaeration cycle to remove air from the system.
Procedure to check and adjust the gas supply pressure for optimal performance.
Steps to verify and set the maximum power for domestic hot water production.
Procedure to check and adjust the minimum heating power.
How to set the maximum heating power level.
Procedure to check and adjust the maximum absolute heating power.
Guide on how to access the boiler's settings menus, including using the access code.
Settings for the Comfort function to ensure hot water availability.
How the SRA function automatically adapts boiler operation to external conditions.
Types of safety shut-offs and their causes, including volatile and non-volatile errors.
Specific safety shut-offs like insufficient circulation and operation shutdown.
Classification of error codes based on the affected boiler circuit or component.
Detailed list of error codes and their meanings for various boiler systems.
Step-by-step instructions for opening the boiler casing and performing an internal inspection.
Recommendations for annual inspections, cleaning, and safety device checks.
