Challenge EH-3C - Fixed Gages

F.352-KO/EH-3C DRILL/AUG 03
3-4
3.0 ACCESSORIES
3.8 FIXED GAGES
For Fast, Accurate Hole Spacing
(For use with optional auto-trip backgauge only)
These fixed gages with pre-cut hole spacings fit on the
side guide in place of the moveable stops. To use,
position the gage so that the right end lines up with the
dimension on the scale for the centerline of the first
hole to be drilled. Use of the stops on fixed gages is
the same as using the adjustable stops.
In addition to 2-5 hole patterns, fixed gages are avail-
able from stock in the following standard types:
22-stop gage, 1/2” centers for multi-ring binders
25-stop gage, 3/8” centers
25-stop gage, 1/4” centers
34-stop gage, 1/2” centers
46-stop gage, 3/8” centers
50-stop gage, 1/4” centers
Custom patterns can also be supplied, call for details.