Challenge EH-3C - Two-Hand Control Kit

3-5
F.352-KO/EH-3C DRILL/AUG 03
3.0 ACCESSORIES
3.9 TWO-HAND CONTROL KIT
Cat. No. A-4851-50
This 2-hand control safety kit can be installed on the
EH-3C in place of the standard foot pedal control. All
of the necessary hardware and instructions are included
in the kit. The 2-hand control offers anti-tiedown and
anti-repeat features, which means both buttons must
be released between each cycle, and both buttons must
be pressed within .5 seconds of each other.