To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• ALWAYS keep remote controls out of reach of children.
NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is
properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely
closed. NEVER permit anyone to cross path of moving gate or
door.
Read instructions thoroughly BEFORE beginning. If
using the Mini Universal Remote Control with
residential door openers, the remote control must
be used only with door openers manufactured after
1993 that utilize photoelectric sensors. The
photoelectric sensors are always located on or near
the bottom of the door track.
STOP
The Mini Universal Remote Control is compatible with the
following brands which use a program/learn button:
Garage Door Opener
Brand
Type/Color of
Program/Learn button Year
Linear
®
Mega-Code ’97-Current
LiftMaster
®
* Orange/Red ’97-’03
LiftMaster
®
* Purple ’05-Current
LiftMaster
®
* Green ’93-’96
Genie
®
Overhead Door
®
Intellicode ’95-Current
Genie
®
Overhead Door
®
** Intellicode ’05-Current
Stanley
®
Secure Code ’98
LiftMaster
®
* Yellow ’11-Current
Wayne Dalton
®
Rolling Code ’99
* Chamberlain
®
, Do-It
®
, Master Mechanic
®
, Raynor
®
, True Value
®
and Sears Craftsman
®
are compatible with LiftMaster
®
technology.
** For Genie Intellicode II programming, go to
www.LiftMaster.com/374ut to download the full manual.