Chamberlain C410 User Manual

Garage Opener Garage Opener
Contents
Preparation ..................................... 2–5
Assembly ...................................... 6–10
Installation ..................................11–28
Install the Door Control ............21–22
Install the Protector System® ....23–26
Power ......................................27–28
Adjustments .................................29–31
Operation .....................................32–37
Features .......................................33
Using your Garage Door Opener .....34
Using the Multi-Function
Control Panel ...........................34–35
Remote Control .............................36
Homelink® ...................................36
To Erase the Memory .....................37
To Open the Door Manually ...........37
Maintenance .....................................38
Troubleshooting ...........................39–40
Accessories ........................................ 41
Warranty ........................................... 42
Repair Parts .................................43–44
Owner’s Manual
C203 • C400 • C410
Chain Drive Garage Door
Opener
FOR RESIDENTIAL USE ONLY
PRE-PROGRAMMED REMOTE CONTROL
INCLUDED
www.chamberlain.com
www.mychamberlain.com
• Please read this manual and the enclosed safety materials carefully!
• Fasten the manual near the garage door after installation.
• The door WILL NOT CLOSE unless the Protector System
®
is connected
and properly aligned.
• Periodic checks of the garage door opener are required to ensure
safe operation.
• The model number label is located on the front panel of your garage
door opener.
• This garage door opener is compatible with myQ® and
Security+b2.0® accessories.
• DO NOT install on a one-piece door if using devices or features
providing unattended close. Unattended devices and features are
to be used ONLY with sectional doors.
TO WATCH VIDEOS GO TO:
tinyurl.com/lgh5x3h

Chamberlain C410 Specifications

General

Type	Chain Drive
Horsepower	1/2 HP
Max Door Height	7 feet
Smart Features	Yes
Battery Backup	No
Remote Control	Yes
Wi-Fi Connectivity	Yes
Voltage	120V
Motor Type	AC
Remote Controls Included	1
Wireless Technology	Wi-Fi
Security	Rolling Code Technology

Summary

Preparation

Safety Symbol and Signal Word Review

Check the Door

Assembly

STEP 1 Assemble the rail and install the trolley

Guides through assembling the rail and attaching the trolley.

STEP 2 Fasten the rail to the motor unit

Instructions for securely attaching the assembled rail to the motor unit.

STEP 3 Install the idler pulley

Details the process of installing the idler pulley on the rail.

STEP 4 Install the chain

Steps for installing and connecting the drive chain to the trolley and motor.

STEP 5 Tighten the chain

Instructions for properly tightening the drive chain to the correct tension.

Installation

IMPORTANT INSTALLATION INSTRUCTIONS

Critical safety warnings and instructions to follow before starting installation.

STEP 1 Determine the header bracket location

Guides on finding the correct location for the header bracket.

STEP 2 Install the header bracket

Detailed steps for installing the header bracket on the wall or ceiling.

STEP 3 Attach the rail to the header bracket

How to connect the garage door opener rail to the header bracket.

STEP 4 Position the garage door opener

Instructions for safely positioning the opener unit for mounting.

STEP 5 Hang the garage door opener

Steps for securely hanging the garage door opener unit.

STEP 7 Attach the emergency release rope and handle

Instructions for attaching the emergency release rope and handle.

STEP 8 Install the door bracket (Sectional Doors)

Attaches the door bracket to sectional garage doors.

STEP 8 Install the door bracket (One-Piece Doors)

Attaches the door bracket to one-piece garage doors.

STEP 9 Connect the door arm to the trolley (Sectional Doors)

Connects the door arm to the trolley for sectional doors.

STEP 9 Connect the door arm to the trolley (One-Piece Doors)

Connects the door arm to the trolley for one-piece doors.

STEP 10 Install the door control

Instructions for installing the wall-mounted door control unit.

STEP 11 Wire the door control to the garage door opener

STEP 13 Install the Protector System

OPTION A - DOOR TRACK INSTALLATION

OPTION B - WALL INSTALLATION

OPTION C - FLOOR INSTALLATION

STEP 14 Wire the Safety Reversing Sensors (Without Pre-Wiring)

STEP 14 Wire the Safety Reversing Sensors (Pre-Wired Installation)

STEP 15 Connect power

STEP 16 Aligning the safety reversing sensors

Adjustments

Introduction

STEP 1 Program the Travel

STEP 2 Test the Safety Reversal System

STEP 3 Test the Protector System

Operation

IMPORTANT SAFETY INSTRUCTIONS

Crucial safety guidelines for operating the garage door opener.

General Opener Usage

Control Panel Functionality

Programming Remotes & Keyless Entry

Manual Door Access

Troubleshooting

Diagnostic Chart

Troubleshooting Common Issues