To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain C455 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Max Door Height | 7 feet |
| Battery Backup | No |
| Security Features | Rolling Code Technology |
| Smart Technology | MyQ® Smartphone Control |
| Safety Features | Safety Sensors |
| Included Accessories | 2 Remote Controls, Wall Control Panel |
Explains safety symbols and signal words used throughout the manual.
Specifies conditions for unattended operation and compatible door types.
Instructions to check door balance, binding, and floor seal for safe operation.
Guide to testing Wi-Fi signal strength for MyQ® connectivity.
Lists tools and extra materials needed for installation.
Details the contents of the opener package and identifies components.
Visual guide to all hardware components used in assembly and installation.
Step-by-step guide to assembling the rail and attaching the trolley.
Instructions on securely attaching the rail assembly to the motor unit.
Procedure for installing the idler pulley mechanism within the rail.
Steps for routing and connecting the drive chain to the trolley and sprocket.
How to tension the drive chain correctly for proper operation.
Crucial safety precautions to follow during installation to prevent injury or death.
Guidance on selecting the correct mounting location for the header bracket.
Detailed steps for physically mounting the header bracket to the wall or ceiling.
Connecting the main rail assembly to the installed header bracket.
Instructions for safely placing the opener unit on a ladder or support.
Securing the opener unit to the ceiling or wall supports.
Guidance on installing appropriate light bulbs into the opener unit.
Instructions for connecting the manual release rope and handle to the trolley.
Steps for attaching the bracket to the garage door itself.
Linking the door arm assembly to the opener trolley.
Mounting and wiring the wall-mounted door control panel.
Connecting the door control wires to the main garage door opener unit.
Placement instructions for safety warning labels.
Mounting and aligning the safety reversing sensors.
Connecting the safety sensor wires to the garage door opener.
Instructions for connecting the opener to electrical power.
Fine-tuning sensor alignment for proper operation.
Checking the wiring of the door control for correct functionality.
Specific guidance for adjusting travel limits on one-piece garage doors.
Setting the open and close limits for the garage door opener.
Procedures for testing the door's auto-reverse function.
Verifying the proper function of the safety reversing sensors.
Initiating the opener's Wi-Fi pairing process.
Linking the opener to your wireless network.
Downloading the app and creating/linking your MyQ® account.
Key safety rules for operating the garage door opener.
How to open and close the door using various control methods.
Steps for disconnecting and operating the door manually.
Explains the push bar, light, learn, and lock button functions.
Details on the automatic door closing feature and its limitations.
How to program remote controls and keypads to the opener.
Procedures for clearing stored remote control and Wi-Fi settings.
Recommended monthly checks for proper door and opener function.
Annual lubrication and checks for door hardware.
Instructions for replacing the battery in the remote control.
Explains diagnostic codes indicated by arrow flashes and their solutions.
Addresses issues like beeping, remote control failure, and light problems.
Options for extending the rail and mounting safety sensors.
Lists laser parking assistant, keypads, remotes, and MyQ® accessories.
Details the warranty period and coverage for the garage door opener.
Provides phone numbers for installation, service, and ordering parts.
Identifies parts specific to the rail and drive mechanism.
Lists components used during the installation process.
Lists part numbers for available accessories.
