Chamberlain Elite SL585UL User Manual

ELITE SERIES INDUSTRIAL
AC SLIDE GATE OPERATOR
Model SL585UL
INSTALLATION MANUAL
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
• THIS PRODUCT IS TO BE INSTALLED AND
SERVICED BY A TRAINED GATE SYSTEMS
TECHNICIAN ONLY.
• This model is for use on vehicular passage gates
ONLY and not intended for use on pedestrian
passage gates.
• This model is intended for use in Class I, II, III and
IV vehicular slide gate applications.
• Visit LiftMaster.com to locate a professional
installing dealer in your area.
• This gate operator is compatible with MyQ
®
and
Security+ 2.0
®
accessories.
SL585101UL
1 HP, 120/208-240 Vac Single Phase
SL585103UL
1 HP, 208-240/480 Vac Three Phase
SL585105UL
1 HP, 575 Vac Three Phase
SL585151UL
1-1/2 HP, 120/208-240 Vac Single Phase
SL585501UL
1/2 HP, 120/208-240 Vac Single Phase
SL585503UL
1/2 HP, 208-240/480 Vac Three Phase
SL585505UL
1/2 HP, 575 Vac Three Phase
Access installation and technical support
guides or register this product
Send it in by texting the
photo to 71403.
Take a photo of the
camera icon including
the points (
).
1.
2.
SL585ULTECH

Chamberlain Elite SL585UL Specifications

General

Brand	Chamberlain
Model	Elite SL585UL
Category	Gate Opener
Language	English

Summary

SAFETY

Usage Classifications and UL325 Requirements

Defines gate operator classifications (I-IV) and UL325 entrapment protection needs.

Safety Installation Information

Guidelines for safe gate operator installation and hazard mitigation.

Critical Safety Instructions

Essential safety warnings and operational guidelines for users.

INSTALLATION

Step 1 Install Operator (Pad Mount)

Instructions for installing the operator on a concrete pad.

Step 1 Install Operator (Post Mount)

Instructions for installing the operator on posts.

Step 2 Attach the Chain

Step 3 Install Entrapment Protection

Requirements and guidance for installing entrapment protection devices.

Wire Entrapment Protection Devices

Single Phase Power Wiring

Three Phase Power Wiring

Step 6 Dual Gate Setup (Wireless)

Step 6 Dual Gate Setup (Wired)

Step 5 Power Wiring

Guidelines for safe and correct power wiring connections.

ADJUSTMENT

Adjust Handing and Limits

Fine Tune Force

Obstruction Test Procedure

Testing the operator's obstruction sensing and reversal function.

CONTROL BOARD OVERVIEW

Control Board Components and Terminals

WIRE ACCESSORIES TO CONTROL BOARD

Sensor and Lock Wiring

EXPANSION BOARD OVERVIEW

Expansion Board Switches and Relays

WIRE ACCESSORIES TO EXPANSION BOARD

Sensor and Control Station Wiring

ADDITIONAL WIRING

Field Wiring Diagrams

PROGRAMMING

Remote Controls and Internet Gateway

Programming remote controls and LiftMaster Internet Gateway.

SETTINGS

Gate Operator Setup Examples

MAINTENANCE

Safety Instructions and Chart

Safety warnings and schedule for regular operator maintenance.

TROUBLESHOOTING

Diagnostic Codes and Tables

Viewing and interpreting diagnostic codes and error tables.

Diagnostic Codes Table (Part 1)

Explains error codes, meanings, solutions, and if saved.

Diagnostic Codes Table (Part 2)

Continues explanation of error codes, meanings, and solutions.

Operator Alarm Information

Troubleshooting Chart (Symptoms & Causes)

Lists common symptoms, possible causes, and solutions.

Troubleshooting Chart (Continued)

Further troubleshooting steps for various operational issues.