Chamberlain KLIK3C Instruction Manual

PROGRAMMING
Remove the cover. Press and hold the program button
until the LED turns on.
Program
Button
Press and release the Program/LEARN button on your
garage door opener.
LED
1
2
Select a button to program. Press and release the
button the specified number of times according to
the chart on the following page. Make sure the LED
stops flashing between each press of the button. The
garage door opener will respond by clicking, blinking,
or activating.
3
Cover

Chamberlain KLIK3C Specifications

General

Brand	Chamberlain
Model	KLIK3C
Category	Remote Control
Language	English