EasyManua.ls Logo

Chamberlain KLIK3C - Commercial Door Operator Programming

Chamberlain KLIK3C
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TEST
Test the remote control by pressing the button. If the
garage door opener does not activate, repeat the
programming steps or visit www.chamberlain.com/klik3
for additional instructions.
To prevent possible SERIOUS INJURY or DEATH:
NEVER allow small children near batteries.
If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
Replace ONLY with 3V CR2032 coin batteries.
DO NOT recharge, disassemble, heat above 212°F
(100°C) or incinerate.
BATTERY
Dispose of batteries properly.
Replace ONLY with
3V CR2032 coin batteries.
Battery

Other manuals for Chamberlain KLIK3C

Related product manuals