EasyManua.ls Logo

Chamberlain Whisper Drive Security+ WD962KD User Manual

Chamberlain Whisper Drive Security+ WD962KD
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.chamberlain.com
GARAGE DOOR OPENER
Models WD962KD
WD962KLD
For Residential Use Only
Owner’s Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless The Protector System
®
is connected
and properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the left side panel of your opener.
®
®

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Chamberlain Whisper Drive Security+ WD962KD and is the answer not in the manual?

Chamberlain Whisper Drive Security+ WD962KD Specifications

General IconGeneral
BrandChamberlain
ModelWhisper Drive Security+ WD962KD
CategoryGarage Door Opener
LanguageEnglish

Summary

Preparing Your Garage Door

Safety Warnings

Crucial warnings to prevent injury or death before starting.

Tools Needed

Lists essential tools for assembly and installation.

Planning

Sectional Door Installations

Specific planning considerations for sectional garage doors.

One-Piece Door Installations

Specific planning considerations for one-piece garage doors.

Carton Inventory

Hardware Inventory

Assembly

Assemble the Rail and Install the Trolley

Guides assembling the rail and installing the trolley.

Fasten the Rail to the Motor Unit

Details securing the rail assembly to the motor unit.

Install the Idler Pulley

Instructions for installing the idler pulley into the rail.

Install the Belt and Attach the Belt Cap Retainer

Covers belt installation and securing the belt cap retainer.

Set the Tension

Describes how to set the belt tension for optimal operation.

Installation

Important Installation Instructions

Crucial safety precautions to follow before and during installation.

Determine the Header Bracket Location

Guidelines for finding the correct placement of the header bracket.

Install the Header Bracket

Step-by-step instructions for mounting the header bracket.

Attach the Rail to the Header Bracket

Connects the rail assembly to the installed header bracket.

Position the Opener

Details on how to position the motor unit and rail correctly.

Hang the Opener

Instructions for securely hanging the opener unit to structural supports.

Install the Door Control

Steps for mounting the wall-mounted door control.

Install the Battery Backup

Guide for installing the optional battery backup unit.

Install the Lights

Instructions for installing the light bulbs in the motor unit.

Attach the Emergency Release Rope and Handle

How to attach the safety release rope and handle.

Electrical Requirements

Information on power supply and wiring requirements.

Install The Protector System®

Steps for installing the safety reversing sensor system.

Fasten the Door Bracket

Instructions for attaching the door bracket to the garage door.

Connect the Door Arm to the Trolley

Links the door arm to the trolley assembly.

Adjustment

Program the Travel Limits

Sets the open and close limits for the garage door.

Set the Force

Adjusts the force required to open and close the door.

Test the Safety Reversal System

Verifies the door reverses when encountering an obstruction.

Test The Protector System®

Checks the functionality of the safety reversing sensors.

Operation

Important Safety Instructions

Key safety guidelines for operating the garage door opener.

Using Your Garage Door Opener

Basic instructions on how to operate the opener.

Using the Wall-Mounted Door Control

How to use the functions of the door control panel.

Care of Your Opener

Maintenance schedule and tips for opener longevity.

To Open the Door Manually

Steps to disconnect the trolley and operate the door manually.

Battery Backup

Information and instructions for the battery backup system.

Having a Problem? (Troubleshooting)

Common issues and solutions for the garage door opener.

Diagnostic Chart

Explains diagnostic codes indicated by the motor unit LED.

Programming

To Add or Reprogram a Hand-held Remote Control

Steps to pair remotes with the opener.

To Erase All Codes From Motor Unit Memory

How to clear all programmed remote codes.

3-Button Remotes (315 MHz)

Specifics on using 3-button remotes.

To Add, Reprogram or Change a Keyless Entry PIN

Instructions for programming Keyless Entry PINs.

Repair Parts

Rail Assembly Parts

Lists parts for the rail assembly.

Installation Parts

Lists parts required for installation.

Accessories

Outside Quick Release

For garages without an access door.

Outdoor Key Switch

Allows operation from outside when remote is not handy.

8 Foot (2.4 m) Rail Extension

Extends rail for longer doors.

10 Foot (3 m) Rail Extension

Extends rail for longer doors.

Extension Brackets

Optional for safety reversing sensor installation.

Remote Light Control

Controls lamps or appliances remotely.

SECURITY+® 3-Button Remote Control

Standard 3-button remote with visor clip.

SECURITY+® 3-Button Mini-Remote Control

Compact 3-button remote with key ring.

SECURITY+® Keyless Entry

Allows outside access via a keypad.

Garage Door Monitor

Monitors door status from inside home.

Notes

Notes

Blank pages for user notes.

Service and Warranty

How to Order Repair Parts

Information on ordering replacement parts.

Chamberlain® One-Year Limited Warranty

Details the product's limited warranty terms.

Related product manuals