To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain Whisper Drive WD822C and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Battery Backup | Yes |
| Voltage | 120V |
| Frequency | 60 Hz |
| Security | Rolling Code Technology |
| Motor Type | AC |
| Drive Type | Chain |
| Speed | 7 inches per second |
| Remote Controls Included | 2 |
| Drive System | Chain |
| Max Door Height | 7 ft |
| Smart Home Compatible | Yes |
| Remote Control | Included |
| Safety Features | Safety sensors |
| Lift Capacity | Up to 7 ft |
| Warranty | Lifetime motor warranty |
Explains safety symbols and signal words in the manual for hazard awareness.
Lists all necessary hand tools for the opener installation and assembly process.
Specific planning advice for sectional garage doors, including reinforcement needs.
Specific planning advice for one-piece garage doors, considering construction.
Guides assembling the T-rail and attaching the belt pulley bracket.
Instructions for inserting and positioning the trolley on the T-rail.
Connects the assembled T-rail to the main motor unit.
Covers belt installation and tensioning for proper drive operation.
Secures the belt cap retainer over the motor unit sprocket.
Locating the correct mounting point for the header bracket.
Securely mounting the header bracket to structural supports.
Connecting the T-rail assembly to the installed header bracket.
Correctly placing the opener unit relative to the door.
Instructions for securely mounting the opener to the ceiling or wall.
Mounting the wall-mounted garage door opener control panel.
Installing the opener's light bulbs and lens.
Connecting the manual release handle and rope.
Outlines safe electrical connections and wiring for the opener.
Installing the safety reversing sensor system for obstruction detection.
Attaching the door bracket to the garage door panel.
Connecting the door arm sections to the opener trolley.
Setting the full open and close positions for the garage door.
Fine-tuning the force settings for opening and closing the door.
Verifying the door reverses correctly upon contact with an obstruction.
Testing the safety reversing sensor's ability to stop the door.
Key safety guidelines for using the garage door opener.
How to operate the opener using the main control panel.
Procedures for manually disengaging and operating the door.
Maintenance tips for the garage door opener.
A guide to diagnosing and resolving common opener issues.
Steps to program new remote controls to the opener.
Instructions for setting up or modifying the keyless entry PIN.
Identifies parts for the opener's rail assembly.
Lists components used during the opener's installation.
Details the various parts making up the motor unit.
Contact information and hours for Chamberlain customer service.
Guidance on ordering replacement parts, including required information.
Details the one-year limited warranty for the garage door opener.
