8
Model 100136
SAFETY
Part No. 101306 Rev. A
Explosion hazard
Burn hazard
Sever hazard (rotating blade)
Crush hazard (top)
MANDATORY ACTIONS
Read manufacturer’s instructions
Wear eye protection
Wear personal protective equipment
Do not leave tools in the area
INSTALLATION HAZARDS
Have only a qualied electrician
or installation technician who is
familiar with applicable codes,
standards and regulations install
and service the generator.
ALWAYS comply with local, state
and national electrical and building
codes when installing the generator.
NEVER alter the recommended
installation in a way that would
render the unit noncompliant with
these codes.
ALWAYS comply with regulations
that Occupational Safety and
Health Administration (OSHA) has
established.
ENSURE the generator is installed
following the manufacturer’s
instructions.
NOTICE
Before welding components on the generator, contact CPE
for recommended welding instructions.
To Next Page
Loading...
