Simplex Control Panel 5 CQF3475 v.02
Operation & Service August 06, 2019
Section 1 – Revision History
Section 2 – General Info
The Simplex Control System uses relay based devices to control the operation of the simplex
compressor unit.
2.1 Features
NEMA 1 Enclosure (NEMA 4 optional)
120VAC Relay Controlled
Selector Switch
Optional Test-Off-Auto switch on reciprocating compressors
Standard Hand-Off-Auto-compressor selector switch (Hydrovane only).
Optional Compressor Hour Meter
Optional circuitry for the following safety controls:
Low oil level
Low oil pressure
Auto Restart in case of power failure
High temperature shut down
MCGUIRE AIR COMPRESSORS INC
MCGUIRE AIR COMPRESSORS INC