Chapter 6 Storage and transportation of the machine
6.1 Storage of the machine
If you do not need to use the machine for a long time, please remove and wash the squeegee and the brush plate, and store
them in a dry clean place. We recommend that you store them in an airtight plastic container.
Make sure that the water tanks are discharged and cleaned.
Charge the battery before storing the machine. If you do not use the machine for a long time, charge the battery regularly (at
least once a month) to make sure that it has enough power.
6.2 Transportation of the machine
When lifting or lowering the machine, make sure that it is in a stable position to prevent it from tipping over or falling.
When the machine leaves the factory, it is fixed on a wooden pallet and carried on a transport vehicle with appropriate
equipment; upon arrival at the destination, the same equipment must be used for loading and unloading.
When using a forklift to move the machine, it must be handled together with the packing; avoid the machine from tipping over
or falling during the operation.
Chapter 7 Common problems and solutions
The batteries cannot be charged.
The charging port is oxidized.
The suction motor does not work.
The brush plate motor does not work.
No water outlet is produced.
The clean water pipe is blocked.
There are impurities in the filter cover.
The electromagnetic valve fails.
Check the electromagnetic valve.
The squeegee is in the wrong position.
Adjust the height of the universal
wheels of the squeegee.
The suction motor is broken.
Replace the suction motor.
The brush plate drops often.
The brush plate buckle is worn.
The water suction efficiency is low.
The floating ball cage is blocked.
Clean the floating ball cage.
The suction pipe is blocked.
The sealing of the sewage tank is cracked.
The strip of the squeegee is cracked.
To Next Page
Loading...