Chapter 4 Instructions on operating the machine
4.1 Walking of the machine
When the general switch is turned off, you can push the machine forward after the brush
plate and the squeegee are lifted.
When the general switch is turned on, you can push the machine forward when the brush
plate and the squeegee are lowered and started.
If you need to pull the machine backward, make sure that the squeegee is lifted or the strip
and the sheet metal will be deformed.
4.2 Scrubbing the floor
Put down the brush plate and the squeegee.
Turn on the switch button.
Turn on the drain switch, the electromagnetic valve will be started and the brush plate begins to work.
Turn on the brush plate button and the brush plate begins to rotate.
Turn on the suction motor button and the suction motor begins to work.
Push the machine forward with your hands to started the cleaning.
Note: when the brush plate motor is turned on, do NOT leave the machine in the same place for a long time, because this
would leave unnecessary marks on the ground.