Channel Master 1.8m Offset Tx/Rx Antenna System

To Next Page

INSTRUCTION AND ASSEMBLY MANUAL

TYPE 183

1.8m Offset Tx/Rx Antenna System

US Sales Office • 1315 Industrial Park Drive, Smithfield, NC 27577 USA • Telephone: (919) 989-2205 • Fax: (919) 989-2200

Germany Sales Office • Göppingerstr. 1, 75179 Pforzheim, Germany • Telephone: +49 (0) 7231-14557-0 • Fax: +49 (0) 7231-14557-10

8000660-02

ECN 9000000

5/03

Main Page

Need help?

Do you have a question about the Channel Master 1.8m Offset Tx/Rx Antenna System and is the answer not in the manual?

Summary

VSAT Antenna;Mount;LNB Limited Twelve (12) Month Warranty

Assembly Tools Required

Preinstallation Materials Checklist

Site Selection

Bolt Torque Specifications

Ground Pole Installation

Assembly and Installation

Grounding Procedures

Typical Electrical Grounding for Antenna Ground Pole

Details typical electrical grounding methods for antenna ground poles as per NEC.

Antenna Alignment Procedure

Polarization of Feed

Explains how to adjust feed horn polarization based on charts and marks.

Elevation Adjustment

Describes adjusting elevation using a clinometer and elevation screw.

Azimuth Adjustment

Details how to set azimuth using charts, compass, and locking bolts.

Fine Tuning

Explains progressive tightening and signal strength optimization for fine tuning.

Parts List

Maintenance and Inspection

Maintenance Inspection Checklist

Provides a checklist for inspecting the foundation, mount, antenna, and feed assembly.

Appendix A: Dimensions

Appendix B: Force and Moment Data

Hardware Sorter Guide