Char-Broil 20202009 User Manual (English)

Questions and Answers:

R
Ruth WaltonAug 7, 2025
Why is my Char-Broil Smoker not heating up?
- R
  Robyn CampbellAug 7, 2025
  If your Char-Broil Smoker isn't heating, first ensure it's properly plugged in—you should hear a beep when it is. If plugged in, and still no heat, turn the smoker OFF and unplug it from the outlet. Check your household circuit breakers or GFCI and reset or replace if needed, using a GFCI rated for 15 amperes or more. Test the outlet with another working appliance, and if it still doesn't work, try a different outlet on a different circuit. If the issue persists, unplug and reconnect the thermostat and control panel connections and if needed, replace the Thermostat Kit, Control Panel Display Kit, or Power Board Kit. For detailed instructions on removal and replacement, refer to the online Electrical Replacement Manual.
M
Melissa FreemanAug 16, 2025
Why does my Char-Broil 20202009 circuit breaker keep tripping?
- D
  debramaciasAug 16, 2025
  If the circuit breaker trips or the fuse blows when using your Char-Broil Smoker, it could be due to several reasons. First, avoid using other electrical appliances on the same circuit. Moisture in the controller or electrical connections can also cause this, so ensure all connections are dry and do not operate the smoker in the rain. Poor electrical connections can also be a culprit; in this case, turn the smoker OFF and unplug it. Check and replace components in the order suggested in the manual. Unplug and reconnect the thermostat connections, and if necessary, replace the Thermostat Kit or the Power Supply Cord Kit. For further assistance with removal and replacement, consult the online Electrical Replacement Manual.
H
Henry BatesAug 26, 2025
What to do if my Char-Broil Smoker has no display?
- J
  joseph13Aug 26, 2025
  If there is no display on your Char-Broil Smoker, the control panel might be faulty. Turn the smoker OFF, and unplug it from the outlet. Then, unplug the smoker and plug it back into the outlet; you should hear a beep. If the issue continues, check and replace components in the order suggested in the manual. Try unplugging and reconnecting the thermostat and control panel connections. If necessary, replace the Thermostat Kit, Control Panel Display Kit, or Power Board Kit. Consult the online Electrical Replacement Manual for detailed instructions on removal and replacement.