30
INSTRUCTION FOR REPLACNG BATTERIES
1. Open the battery housing cover
2. Take out the battery housing
3. Place the batteries
4. Make sure that the battery housing
pins will touch the right points
5. Re-install the battery housing
6. Close the battery housing cover.
7
EXPLANATION OF THE GRAPHIC SYMBOLS
SN-T13000001
Designation of the serial number of
every device, applied at the device.
(Number as an example)
“Please note the accompanying
documents“
or “Observe operating instructions”
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist.,
Taichung City 412, Taiwan (R.O.C.)
Identification of manufacturer of
medical product including address
Carefully read this operation manual
before setup and commissioning,
even if you are already familiar with
Charder scales.
To Next Page
Loading...
