Charder MS3400 - Symbol and Error Message Guide; Graphic Symbols Explanation; Error Message Interpretation

-
5
-
EXPLANATION OF THE GRAPHIC SYMBOLS
SN-T13000001
Designation of the serial number of
every device, applied at the device.
(Number as an example)
“Please note the accompanying
documents“
or “Observe operating instructions”
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist.,
Taichung City 412, Taiwan (R.O.C.)
Identification of manufacturer of
medical product including address
“Electro-medical appliance“
with attachment for type B
-26-
ERROR MESSAGE
 Low Battery
If battery is running out of power, the
display shows . You should charge
the
scale.
 Over Load
If the total load exceeds the maximum
capacity of scale, the display will show
the “Err” message. The weight must be
removed from the platform right away.

Under
Zero
If zero count is below the setting, the
display will show “Errl” message. The
scale will shut off if the status lasts 30
seconds.

Over Zero
If zero count is high than the setting
range, the display will show “Err”
message. The scale will shut off if the
status lasts 30 seconds.