Charder MS3400 - EMC Guidance and Declarations; Electromagnetic Emissions; Measuring Under 131 cm

-7-
EMC guidance and manufacturer's declaration
Guidance and manufacturer’s declaration-electromagnetic emissions
The MS-3400-1 is intended for use in the electromagnetic environment specified below.
The customer or the user of the MS-3400-1 should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment-guidance
RF emissions
CISPR II
Group 1 The MS-3400-1 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR II
Class B
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/flicker
emissions IEC
61000-3-3
Compliance
The MS-3400-1 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
-24-
1. Fold the plate and press the tenon.
Pull down the plate while tenon has been pressed.
MEASURING UNDER 131 cm