Charmglow 720-0677 - Charcoal Lid Assembly; Charcoal Grill Attachment

13
8. Charcoal Lid Assembly
Take out the lid (J) from carton, then attach
lid (J) to the firebox (I) using two 1/4-in. x 23-
mm main lid screws (AA), 1/4-in. flat washers
(FF), 1/4-in. lock washers and 1/4-in. nut (EE)
to keep this lid in place as shown in Fig. 10.
NOTE: Secure all of the above screws from
outside to inside.
9. Charcoal Grill Attachment Assembly
Attach the charcoal grill to the main grill, then using
two 1/4-in. x 12-mm truss head screws (CC) to align
the bottom two key holes to the main grill as shown in
Fig.11
J
Fig. 11
Fig. 10
I
Charcoal
grill
2X
Main grill
Figure 246
CSA INTERNATIONAL
Project 2078110
14 of 46