What to do if the Ultrasound Applicator becomes unplugged on Chattanooga Group Intelect Transport Combo Medical Equipment?
If the Ultrasound Applicator was unplugged during treatment with your Chattanooga Group Medical Equipment, ensure the Ultrasound Applicator is properly plugged into the unit's receptacle and fully seated.
Lists general safety precautions and warnings for operating the unit.
Details critical warnings regarding patient safety and device operation.
Highlights severe risks and hazards associated with using the device.
Lists uses, situations to avoid, and potential negative effects of electrotherapy.
Lists uses, contraindications, and adverse effects related to ultrasound therapy.
Details physical dimensions, weight, power, electrical specifications, and operating environment.
Details parameters for Premodulated and Interferential waveforms.
Details parameters for High Voltage Pulsed Current (HVPC) and Russian waveforms.
Lists technical specifications for ultrasound output, duty cycles, and frequency.
Step-by-step guide to starting, pausing, and stopping electrotherapy treatments.
Step-by-step guide to starting, pausing, and stopping ultrasound treatments.
Guide to performing and managing combination electrotherapy and ultrasound treatments.
Lists error codes, probable causes, and remedies for unit issues.
General| Power Supply | AC Adapter |
|---|---|
| Ultrasound Frequency | 1 MHz and 3 MHz |
| Frequency Range (TENS/EMS) | 1-150 Hz |
| Treatment Timer | 1-60 minutes |
| Warranty | 2 years |
| Type | Combination Therapy Unit |
| Weight | 2.7 kg |
| Power Requirements | 100-240V, 50/60Hz |
| Channels | 2 |
| Ultrasound Duty Cycle | 10%, 20%, 50% |
| Electrical Stimulation Modes | TENS, EMS, Microcurrent |
| Electrical Stimulation Waveforms | Biphasic |
| Display | LCD |
To Next Page
