13
SPECIFICATIONS
RECOMMENDATIONS
1. The connector tube should be disconnected from
the dial gauge/inflation bulb before storage.
2. The three-chamber pressure cell must be stored
flat or folded along the seams when not in use.
3. Cleaning the STABILIZER should be done only with
a damp cloth.
MEASURING RANGE Analog 0-200 mmHg
pressure
ACCURACY ±3 mmHg pressure
INFLATE Squeeze bulbs (after
tightening screw valve)
DEFLATE Loosen screw valve
Complete unit comes with instruction booklet.
BOXED:
Dimensions: 10 x 10 x 19 cm (4 x 4 x 8 in)
WEIGHT: Approx. 600 g (21 oz)
To Next Page
Loading...
