3D ActiveTrac
®
22
OPERATION
CERVICAL TRACTION TREATMENT PROCEDURE CONTINUED
6. Use pillows, bolsters or the optional flexion stool as desired
for position of the lower extremities.
7. Give the patient the Patient Control Switch and instruct in its
use.
8. Use the Touchscreen Control Panel (TCP) to enter the desired
treatment protocol. Press the START icon when ready.
9. When the treatment is over, traction gently releases by itself.
To release the patient, loosen the headstrap. The patient
should carefully move head from side to side for about one
minute before getting up.
To Next Page
Loading...
