Chattanooga Vectra Neo User Manual (English)

Questions and Answers:

S
simpsonmatthewSep 4, 2025
What to do if I attempt to select an sEMG treatment but no sEMG is installed on the Stim 1/2 module on Chattanooga Medical Equipment?
- B
  Brenda ShermanSep 4, 2025
  If you're trying to select an sEMG treatment but no sEMG is installed on the Stim 1/2 module: 1. If sEMG is installed on the Stim 1/2 module, reset the Therapy System by turning it Off then back On via the Power button. 2. If sEMG is installed on the Stim 1/2 module and the problem persists, discontinue use of the device and contact the dealer or factory for technical service.
C
Christopher WilliamsonAug 23, 2025
What to do if electrotherapy shows bad electrode contact on Chattanooga Medical Equipment?
- D
  Daniel MendozaAug 23, 2025
  If your Chattanooga Medical Equipment indicates a bad electrode contact, overcurrent, or shorted leads, take the following steps: 1. Ensure you are following proper electrode placement guidelines. 2. Check the electrode lead wire connections, both at the unit and at the electrode. 3. Try replacing the electrodes. 4. If the issue persists, replace the lead wires.
J
Jacqueline ShahSep 1, 2025
What to do if no laser applicator is plugged into the Chattanooga Medical Equipment unit?
- C
  Carlos MooreSep 1, 2025
  If no laser applicator is plugged into the unit, ensure the desired laser applicator is securely connected to the unit prior to selecting a laser treatment.
C
calvin74Sep 1, 2025
What to do if no ultrasound applicator is plugged into the Chattanooga Medical Equipment unit?
- S
  Shawn CookSep 1, 2025
  If no ultrasound applicator is plugged into the unit, make sure that the desired ultrasound applicator is securely connected to the unit before you select an ultrasound treatment.
B
brianapriceAug 30, 2025
What to do if I attempt to select a Laser treatment while another treatment is running on Chattanooga Medical Equipment?
- D
  Dawn RobinsonAug 31, 2025
  If you attempt to select a Laser treatment while another treatment is running, complete existing treatment(s) before attempting to select a laser treatment. Laser treatments cannot be run concurrently with another treatment.
S
scottjohnAug 29, 2025
What to do if I attempt to select an sEMG treatment but sEMG channels are currently in use on Chattanooga Medical Equipment?
- E
  Eric MorganAug 29, 2025
  If you're trying to select an sEMG treatment, but the sEMG channels are currently in use, complete the existing treatment before attempting to start another treatment on the same channel.
D
Donald RiveraAug 28, 2025
What to do if I attempt to select a treatment but available channels for desired modality are currently in use on Chattanooga Medical Equipment?
- L
  lsmithAug 28, 2025
  If you are attempting to select a treatment, but available channels for desired modality are currently in use, complete the existing treatment before attempting to start another treatment on the same channel.
J
Jacob RuizAug 27, 2025
What to do if I attempt to perform an action requiring a particular file on the USB flash drive, but the file does not exist on the Chattanooga Medical Equipment?
- L
  Lisa MarshallAug 27, 2025
  If you're attempting an action requiring a specific file on the USB flash drive, but the file doesn't exist, make sure the USB flash drive contains the correct file for the desired function. Also, ensure a valid USB flash drive is firmly inserted into the unit, or try a different USB flash drive.
V
vmillerAug 26, 2025
What to do if I attempt to perform an action requiring the USB flash drive, but no USB flash drive is plugged into the Chattanooga Medical Equipment?
- N
  Nicole SawyerAug 27, 2025
  If you're attempting an action needing a USB flash drive and none is plugged in, or it cannot be accessed, ensure a valid USB flash drive is firmly inserted into the unit. Alternatively, try a different USB flash drive.
J
julian10Aug 25, 2025
What to do if I entered the incorrect Laser PIN on Chattanooga Medical Equipment?
- T
  Todd PierceAug 26, 2025
  If you entered the incorrect Laser PIN, enter the correct laser PIN when prompted prior to starting a laser treatment.

Chattanooga Vectra Neo Specifications

General

Brand	Chattanooga
Model	Vectra Neo
Category	Medical Equipment
Language	English

Summary

Introduction to Vectra Neo Clinical Therapy System

Precautionary Instructions and Symbols

Explains safety symbols and their meanings used throughout the manual.

General Terminology and Software Symbols

Defines terms and explains software icons for system operation and control functionality.

Device Markings and Indications for Use

Details device markings and lists intended uses for electrotherapy, sEMG, and laser.

Device Description and Operator Interface

Product Description and Overview

Overview of the Vectra® Neo Clinical Therapy System's modular design and components.

Operator Interface Controls and Functions

Details the front, rear, and side controls and their functions on the system.

General Warnings, Precautions, and Safety

Cautionary Statements

General cautions for safe operation and maintenance to prevent minor injury or damage.

Warning Statements

General warnings for safe operation and maintenance to prevent serious injury or damage.

Danger Statements

High-risk safety warnings and potential hazards that could result in death or serious injury.

Setup Instructions for Therapy System

Head to Cart Assembly

Instructions for assembling the therapy system head to the cart.

Neo Leg to Cart Assembly and Adjustment

Steps for attaching and adjusting the cart legs for height.

Module Installation and System Start-Up

Guide for installing therapy modules and steps for system start-up.

System Specifications and Technical Details

System Specifications and Dimensions

Provides physical measurements and electrical specifications for the system.

Ultrasound and Laser Specifications

Details technical specifications for ultrasound and laser modalities.

Laser Protective Eyewear Specifications

Information on required protective eyewear for laser use.

Patient Preparation Guidelines

Electrode Placement and DURA-STICK® Electrodes

Guidelines for proper electrode application for electrotherapy.

sEMG & Stim Patient Preparation

Instructions for preparing patients for sEMG and stimulation therapies.

Laser and Ultrasound Patient Preparation

Steps for preparing the patient's skin for laser and ultrasound therapy.

Device User Interface and Operation

Screen Description and Home Screen

Explains the layout of the system's interface and the home screen.

Utilities, Options, and Treatment Screens

Details user preferences, system settings, and treatment screen elements.

Electrotherapy, Ultrasound, and Combination Operation

Guides for operating electrotherapy, ultrasound, and combination therapies.

sEMG, Laser, and Data Saving Operations

Guides for sEMG, laser operation, and saving data to USB.

Troubleshooting and Error Codes

Troubleshooting Codes and Solutions

Lists error codes, probable causes, and remedies for system issues.

Accessories and Replacement Parts

Replacement Accessories Overview

Information on ordering replacement parts and accessories.

Laser and Ultrasound Specific Accessories

Lists specific accessories for laser and ultrasound therapies.

Maintenance and Calibration

System Cleaning Procedures

Instructions for cleaning the Vectra® Neo Clinical Therapy System.

Applicator Calibration Requirements

Details required calibration procedures for ultrasound and laser applicators.

Service and Warranty Information

Warranty Repair and Service Procedures

Procedures for obtaining service and warranty claims.

Product Warranty Terms and Conditions

Details the product warranty terms and conditions.

Appendices and Technical Data

Appendix 1: Laser Therapy Overview and Terms

Explains laser therapy principles, treatment tips, and defines common terms.

Appendix 2: Electromagnetic Compatibility (EMC)

Information regarding EMC compliance and guidelines for medical devices.

Appendix 3: Output Calculations and Electrode Selection

Provides formulas for output current and guides for electrode size selection.

Related product manuals

Chattanooga Triton 4749

60 pages

Chattanooga hydrocollator

25 pages

Chattanooga Intelect HPL7

42 pages

Chattanooga Adapta ADP400

24 pages

Chattanooga 3D ActiveTrac