iGage X9x User Manual page 4 of 53
Introduction
Thank you very much for choosing to purchase and use an X900+ or X91+ GPS receiver!
With a ground-breaking price, outstanding performance, field ready carry case and easy-to-use features, we know that a CHC GPS
receiver will be a valuable tool that quickly pays for itself.
The X900+ and X91+ receivers are nearly identical. The only differences are the external case style and the internal GNSS Engine.
Trimble BD970 GNSS Engine
This guide is designed to help you familiarize yourself with your new equipment and to put it to use in the field.
If you have questions or suggestions, don’t hesitate to contact us:
iGage Mapping Corporation
1545 South 1100 East Suite 1
Salt Lake City UT 84105 USA
+1-801-412-0011
email x9@igage.com
Your input is extremely valuable to us and we will listen to your suggestions!
Software updates and news are available from:
www.x9gps.com
Training Videos
Training videos specific to setting up a X9x Base, Rover and Network Rover are available from the
[ Videos ] link on the x9gps.com website.
If you are not familiar with any of these subjects:
US Survey Feet vs. International Feet (Video #1)
Grid vs. Ground Distance Measurements (Video #2)
Ellipsoid vs. Orthometric Heights (Video #3)
Setting up a Tripod/Tribrach (Video #66)
Check out the videos at www.igage.com/v
There are Carlson SurvCE specific videos that address scale factors and aligning measured and record data.
SurvCE Manual
An electronic copy of the manual for SurvCE can be found on the Carlson website:
www.survce.com
Click on ‘Software Download’ for version 3.0, then select product version 3.0 and click on ‘Show Files’. A link to the latest manual
version will shown:
In addition there are a variety of excellent SurvCE training videos available at the Carlson Software website:
www.carlsonsw.com
To Next Page
Loading...
Need help?
General
