CHD CHD6800 - ESC T Select Character Code Table; FS! Set Print Mode for Kanji (JISX0208)

PRINTER CHD6800 Technical Manual
© Computer Hardware Design 13
2.16 ESC t Select character code table
[FORMAT] <1B>H<74>H<n>
[RANGE] n – see table below
[FUNCTION] Selects a page n of the character code table.
n
PAGE
0
CP 437 (USA, Standard Europe)
1
JISX0201 (Katakana)
6
JISX0208
7
Shift JIS
16
CP 1252 (Latin I)
24
CP 1253 (Greek)
26
CP 1257 (Baltic)
28
CP 1251 (Cyrillic)
33
CP 1255 (Hebrew)
40
CP 1256 (Arabic) (v5.4.0)
42
CP 1250 (Central European (Windows))
43
GB2312 (Simplified Chinese) (v2.2.0)
44
BIG 5
255
User defined page (v4.0.0)
[CAUTION] If unsupported code page is sent, already set one is not changed.
User define page CP (n = 255) will be set only if user defined characters are set (ESC &).
This command does not interfere with ESC % command.
For JISX0201, JISX0208, Shift JIS, GB2312 and BIG 5 text rendering differs from other
code page rendering. Appropriate renderer is selected for the whole printable text line by
looking-up code page for the first printable character in the line (v5.3.0). Use either 1 of
listed 5 code page chars in single line. Other code page chars except 5 listed may be freely
mixed in 1 text line.
[DEFAULT] n=26.
2.17 FS ! Set print mode for Kanji (JISX0208)
[FORMAT] <1C>H<21>H<n>
[RANGE] n – ignored
[FUNCTION] Ignored.
[CAUTION] Use ESC t to set code page.