CHD CHD6800 - FS & Set Kanji on (JISX0208); Set Kanji off (JISX0208); FS C Set JIS Type for Kanji (JISX0208); FS - Set Underline for Kanji (JISX0208)

Technical Manual PRINTER CHD6800
14 © Computer Hardware Design
2.18 FS & Set Kanji ON (JISX0208)
[FORMAT] <1C>H<26>H
[FUNCTION] When JISX0201, JISX0208 or Shift JIS set, sets Kanji mode ON.
[CAUTION] Use ESC t to set code page.
Effective only if before set JIS type (using FS C command)
2.19 FS . Set Kanji OFF (JISX0208)
[FORMAT] <1C>H<2E>H
[FUNCTION] When JISX0201, JISX0208 or Shift JIS set, sets Kanji mode OFF.
[CAUTION] Use ESC t to set code page.
Effective only if before set JIS type (using FS C command)
2.20 FS C Set JIS type for Kanji (JISX0208)
[FORMAT] <1C>H<43>H<n>
[FUNCTION] Sets JIS type.
n = 0, 30 JIS
n = 1, 31 Shift JIS
[CAUTION] Use ESC t to set code page.
This command is cannceled only by power cycle or ESC @ command
2.21 FS - Set underline for Kanji (JISX0208)
[FORMAT] <1C>H<2D>H<n>
[RANGE] n – ignored
[FUNCTION] Ignored.
2.22 FS S Set spacing for Kanji (JISX0208)
[FORMAT] <1C>H<53>H<n><m>
[RANGE] n – ignored
m - ignored
[FUNCTION] ignored.