15
3000 Appliances
Single appliance installation
Note - A single appliance can only be installed in the middle of the shelf, not
on the side. These appliances must be placed with their ports facing the front
of the shelf.
1.
Place the shelf on a flat surface.
2. Identify the location for your appliance. Refer to the
"Legend" on
page8
.
3.
Attach the appliance to the shelf using 4 black screws:
a.
Lift up the shelf and insert the screw from underneath, through
the hole next to the letter F.
b.
Screw partially one by one until all 4 screws are secured, then
fasten all 4.
4.
To secure the appliance, use a screwdriver (not included in kit) to
tighten the screws on the bottom of the shelf.
5.
To pull out the service tag, pull it a bit to the bottom side and out.
To Next Page
Loading...
