Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 7
C H A P TE R 1
Check Point 1400 Appliance Overview
Check Point 1400 appliances support the Check Point Software Blade architecture and provide
independent, modular and centrally managed security building blocks. You can quickly enable and
configure the Software Blades to meet your specific security needs.
These appliances run an embedded version of the Gaia operating system. It includes core
configuration elements such as clish interface, SNMPv2/3 and routing stack implementations. In
addition to the Gaia features, Embedded Gaia contains support for built-in network switches,
wireless networks, 4G/LTE Internet connectivity, multiple Internet connections (more than 2) in
High Availability or Load Sharing mode, Policy Based Routing, and DDNS support. Quick
deployment with USB and with SD card is supported. For more information, see the 1400 Security
Gateway series product page
https://supportcenter.checkpoint.com/supportcenter/portal?model=&version=R77&os=&eventSu
bmit_doShowproductpage=&productTab=documents&product=490.
This guide describes all aspects that apply to central management mode. For more information on
central management, see the
Check Point 1400 Locally Managed Administration Guide
.
Note - Some topics only apply to specific appliances or models.
1430/1450 Wired, WiFi,
WiFi + DSL
sk110985
http://supportcontent.checkpoint.com/solutions?id=sk110985
1470/1490 Wired, WiFi,
PoE Wired
sk110985
http://supportcontent.checkpoint.com/solutions?id=sk110985
For front and back panel details for each appliance, see the relevant
Getting Started Guide
.
Review these materials before doing the procedures in this guide:
•
R77.20.85 Release Notes
• Known Limitations
• Resolved Issues
•
Getting Started Guide
• Small Business Security video channel
https://www.youtube.com/playlist?list=PLMAKXIJBvfAhDnKJwzE5dFGiChiSqVVoW
See the R77.20.85 home page http://supportcontent.checkpoint.com/solutions?id=sk140193.
To Next Page
Loading...
