Check Point Smart-1 25

Need help?

Do you have a question about the Check Point Smart-1 25 and is the answer not in the manual?

Summary

Mounting Smart-1 25 in a Rack

Safety Instructions for Rack Mounting

Guidelines for safely installing the Smart-1 25 appliance in a rack cabinet.

Space and Weight Requirements

Preparing Appliance for Rack Mounting

Installing Smart-1 25 in Rack

Step-by-step guide for physically installing the Smart-1 25 appliance into the rack.

Configuring Smart-1

Initial Setup and Wizard

Outlines the basic workflow for configuring Smart-1, including power and initial setup via the wizard.

Network and System Configuration

Configures network interfaces, routing, DNS, and domain settings for the appliance.

Security Management Installation Type

Selects the installation type for Security Management features, including Eventia Suite.

Security Management Roles

SmartEvent and SmartReporter Configuration

Console and Client Setup

Guides on downloading and installing SmartConsole applications for managing the appliance.

Configuring SmartEvent

Preparing SmartEvent Server

Steps to prepare the Security Management Server for SmartEvent integration.

Defining Internal Network

Correlation Units and Log Servers

Smart-1 Hardware

Power Supply Management

Procedures for removing and installing redundant power supplies in the appliance.

Hard Disk Drive Management

Instructions for managing the hot-swappable hard disk drives in the Smart-1 25.

Restoring Factory Defaults

Restore via WebUI

Steps to restore the appliance to factory defaults using the Web-based User Interface.

Restore via Console

Restore Using LCD Panel

How to restore factory defaults using the appliance's LCD panel and navigation keys.