Check Point Smart-1 25 - Rack Mounting Hardware and Required Tools

Rack Mounting Hardware and Required Tools
Mounting Smart-1 25 in a Rack Page 13
Rack Mounting Hardware and Required
Tools
Item
Description
Qty.
Use
(1)
Appliance rail
2
Attaches to the Smart-1 25 appliance. Out-of-
the box it comes combined with the slide. Both
appliance rails are identical.
Screw (short).
RoHS I#6-32*L5-Ni
6
Attaches the appliance rail to the appliance
(2)
Slide
2
Allows the Smart-1 appliance to slide in and
out of the rack for access. Out-of-the box it
comes combined with the appliance rail. Both
slides are identical.
(3)
Mounting bracket
4
Mounts the slide to the rack vertical rails. All
mounting brackets are identical.
Screw (long).
RoHS NUT-Flange M4
Coating Ni
8
Attaches slide to mounting brackets
Threaded washer.
RoHS 14.0*L8-Ni
8
Attaches slide to mounting brackets
Appliance ear bracket
2
Attaches to the Smart-1 25 front panel. Both
bracket ears are identical.