Check Point Smart-1 25 - Space and Weight Requirements

Determining Space and Weight Requirements
Mounting Smart-1 25 in a Rack Page 12
Determining Space and Weight
Requirements
Allow sufficient vertical space in the rack for the appliance:
Model
Height
Weight (Kg)
Smart-1 25
1U (1.75 inch, 44.5 mm)
13.5
The distance from the center of any hole to the center of the third hole above it is equivalent to 1U.
The mounting holes in a standard 19-inch (482.6 mm) server rack rail are arranged as follows:
When installing appliances, start measuring from the center of the two holes with closer spacing. Otherwise,
the screw holes on the appliance may not match those on the rack.