Check Point Smart-1 50

Need help?

Do you have a question about the Check Point Smart-1 50 and is the answer not in the manual?

Summary

Detailed explanation of Smart-1 appliance features, architecture, and benefits for network security.

Essential safety guidelines for installing the appliance within a rack cabinet.

Comprehensive guide to performing the initial setup and configuration of the Smart-1.

Steps to configure and prepare the SmartEvent component on the Security Management Server.

Steps to configure and prepare the SmartEvent component on a Multi-Domain Server.

Procedure for reverting the appliance to its factory default configuration via the Web interface.

Method to restore factory defaults by connecting through a console terminal emulator.

Step-by-step instructions for restoring factory default settings using the appliance's LCD panel.

Instructions on how to remotely manage the appliance's power status (on/off/reset) via LOM.

General

Wi-Fi	No
Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Security algorithms	802.1x RADIUS
Serial ports quantity	1
USB 2.0 ports quantity	2
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	4
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power supply	600 W
Power consumption (typical)	505.3 W
Power requirements	90 - 264V, 47/63Hz
Display	LCD
Certification	CE, FCC, RoHS
Rack capacity	2U
RAID levels	10
HDD capacity	1000 GB
Total storage capacity	4000 GB