Chef's Choice 2100 - User Manual

InstructIons
Ceramic Knife Sharpening Module
for use on Chef’sChoice
®
Model 2100 Commercial Sharpener
Read these instructions before use. It is essential
that you follow these instructions to achieve optimum results.
© 2016 EdgeCraft Corp.
Module shown inserted in Model 2100 Sharpener.
(Sharpener not included).
EIFGB

Summary

Instructions for Use of Ceramic Sharpening Module

Inserting Sharpening Module

Guide on how to correctly install the sharpening module into the main unit.

Sharpening First Time with Ceramic Knife Module

Instructions for initial familiarization with the ceramic knife sharpening process.

Sharpening the Ceramic Knife

Sharpening the Edge in Stage 1

Detailed steps for sharpening ceramic knives in Stage 1.

Honing in Stage 2

Process for honing ceramic knives using Stage 2 disks.

Finishing the Edge in Stage 3 Polish;Finish

Dressing of Stropping;Sharpening Disks - Stage 3

Procedure for cleaning and maintaining Stage 3 sharpening disks.

Resharpening Ceramic Knives

Cleaning the Sharpening Module

Suggestions

Service

Normal Maintenance

Guidelines for routine cleaning and care of the sharpening module exterior.

Chef's Choice 2100 Specifications

General

Category	Knife Sharpener
Model	2100
Type	Electric
Stages	3
Sharpening Angle	20 degrees
Motorized	Yes
Power Source	Electric
Voltage	120V
Abrasive Material	Diamond