English - 7
is working.
7. Once steaming is complete, the unit will beep. “END” will display on the screen indicating that
cooking is done.
Roasting / Baking:
1. Press the desired preset. The LED light will flash and the default time and temperature will
appear on the screen.
2. To set the desired cooking time, press the + or - associated with the time. The time can be set
for up to 6 hours.
3. To set the desired cooking temperature, press the + or - associated with the temperature.
4. Press the START/CANCEL button to begin cooking. The multi-cooker will start preheating and
will display PRE-HEAT. Once peheat is complete, the multi-cooker will beep three times. You
can then start cooking.
5.
Before the cooking cycle is complete, press + or - to adjust the time as needed.
6. Add food directly in the cooking pot.
7. Once cooking is complete, the unit will beep. “END” will display on the screen indicating that
cooking is done.
Searing / Sautéing:
1. Press the Sear/Sauté function. The LED light will flash and the default time and temperature
will appear on the screen.
2. To set the desired time, press the + or - associated with the time. The time can be set for up to
1 hour.
3. To set the desired temperature, press the + or - associated with the temperature.
4. Press the START/CANCEL button. The multi-cooker will start to preheat and will display PRE-
HEAT. Once the appliance has preheated, it will beep three times.
5. Before the cooking cycle is complete, press + or - to adjust the time as needed.
6. Place food directly in the cooking pot.
7. To turn off the unit at any time during cooking, press START/CANCEL button again.
8. Once time is complete, the unit will beep. “END” will display on the screen indicating that
cooking is done.
NOTE: You can use this function with or without the lid placed on the pot.
Delayed Start
1. Press the preset you want to select, the LED light will flash,
2. Set the temperature and time you want per above instruction,
3. Press “Delay Start”, the light will be flash, then press + or - of time to set the delay time you
want to. For example, if you want to start the appliance to work after 30minutes, press the +
or - of time to set 30 minutes.
4. Press “Start/Cancel” to start the preset you selected in delay start program,
5. After the set time up, the appliance will be a solid light to indicate it is ON.
6. The appliance will beep and “end” will display to indicate the cooking cycle has completed.
Keep Warm
1. Press “Keep Warm” preset, the LED light will flash.
2. Set the time you want to keep warm. Notice: the temperature default is 150F and cannot
be changed.
3. Press Start/Cancel to start keep warm preset.
4. The appliance will beep and “end” will display to indicate the cooking cycle has completed.
To Next Page
Loading...
