Need help?Do you have a question about the Chenbro SR301 series and is the answer not in the manual?
Provides backplane specific information, features, jumper settings, and pin definitions.
Describes the SR301 chassis modifications for tool-less trays and PCI-e 3.0 slot.
Lists supported features like 6Gb/s, 12Gb/s SAS/SATA, hot-swap, temperature monitoring, and connectors.
Lists the compatible chassis model, SR30169 Plus.
Provides the physical dimensions of the backplane with diagrams.
Lists all connectors, headers, and jumpers on the backplane with their functions.
Details the four SFF-8482 connectors for SATA/SAS drives and their pin functions.
Describes the mini-SAS HD connector for mainboard/HBA connection and its pinout.
Explains the 4-pin header for PWM fan power and monitoring, and disabling backplane monitoring.
Details jumper settings for HDD access LED and SGPIO modes, including LED status.
Describes two connectors for powering four 3.5" hard disks and recommended configuration.
Explains the I2C connector for monitoring HDD temperature and fan status via IPMI.
Details the pin header for configuring event LED and mute functions.
Explains the DIP switch for controlling hardware monitor functions like PWM fan, temperature, and buzzer.
Provides methods for submitting technical support inquiries: phone, email, and web.
To Next Page
General
