Need help?Do you have a question about the Chenbro RM23808 and is the answer not in the manual?
Overview of system features with diagrams and component labels.
Details the front panel layout, components, and controls.
Details the back panel layout, ports, and power supply connections.
Explains the front control panel buttons, LEDs, and connectors.
Illustrates different front drive bay configurations for various models.
Provides physical dimensions of the chassis and label embossing.
Details options for rack mounting kits and compatibility.
Lists environmental specifications for operation and non-operation.
Information on system packaging, testing, and weight.
Instructions for removing and installing the chassis top cover.
Steps to remove and install the HDD cage assembly.
Instructions for hot-swap HDD assembly removal and installation.
Steps for tool-less removal of 3.5" HDDs from trays.
Steps for screw-type removal of 3.5" HDDs from trays.
Instructions for hot-swap 2.5" HDD assembly removal and installation.
Steps for tool-less removal of 2.5" HDDs from trays.
Steps for screw-type removal of 2.5" HDDs from trays.
Instructions for removing 2.5" HDDs from 3.5" trays.
Steps for removing and installing internal 2.5" HDDs.
Instructions for removing and installing a slim ODD.
Procedures for removing and installing the entire system in a rack.
Steps for removing and installing the main fan assembly.
Instructions for removing and installing individual fan modules.
Steps for removing and installing the air baffle.
Instructions for installing a 2.5" 2-bay drive cage on the back panel.
Steps to install the drive backplane onto the back panel.
Instructions for installing full-height PCIe cards and riser cards.
Steps for installing and removing the Power Supply Unit (PSU).
Instructions for assembling and installing a redundant PSU cage.
Steps for installing and removing CRPS modules.
Instructions for installing slide rails for rack mounting.
Lists the various storage backplane options available for the chassis.
Specifications and details for the 3.5" 8-port Mini-SAS HD passive backplane.
Describes connectors and pin headers for the 3.5" 8-port backplane.
Configuration details for fan settings on the RM23808 backplane.
Specifications for the 3.5" 12-port Mini-SAS HD passive backplane.
Describes connectors and pin headers for the 12-port passive backplane.
Details the dip switch settings for backplane configuration.
Specifications for the 3.5" 12-port Mini-SAS HD active backplane.
Describes connectors and pin headers for the 12-port active backplane.
Configuration settings for dip switches and fan for active backplane.
Details the 2 x 2.5" drive bay accessory kit and its usage.
Specifications for the SATA backplane.
Details connectors and pin headers for the SATA backplane.
Specifications for the OCuLink backplane.
Details connectors and pin headers for the OCuLink backplane.
Specifications for the 2.5" 8-port Mini-SAS HD passive backplane.
Describes connectors, pin headers, and dip switch settings for the backplane.
Specifications for the 2.5" 16-port SAS backplane with expander.
Details connectors and pin headers for the 16-port backplane.
Details the specifications of the expander board.
Details connectors, pin headers, and dip switch settings for the expander board.
Specifications for the 2.5" 8-port SATA/SAS/NVMe backplane.
Details connectors and pin headers for the SATA/SAS/NVMe backplane.
Specifications for the 2.5" 8-port NVMe passive backplane.
Details connectors and pin headers for the NVMe backplane.
Procedure for handling products found defective upon arrival.
Information required for technical support requests.
To Next Page
General
