RM238 Series
System Components Removal and Installation │ 33
2-6 System Maintenance
Figure 46 Removal of whole system from the rack
1. Open and hold the latches on both sides as shown.
2. Loosen the screws in the latches, and firmly grab the rack handles on both sides.
3. Pull the system out of the cabinet.
Figure 47 Installation of whole system into the rack
1. Firmly hold the system on both sides, and push the system all the way into the cabinet.
2. Open and hold the latches on both sides as shown.
3. Secure the screws in the latches on both sides.
To Next Page
Loading...
