RM238 Series
Product Overview │ 17
1-7 Available Rack Mounting Kit Options (Refer to “Installation”)
Advisory Note – Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed
in a rack. If you chose to do so, Chenbro advises you to verify your shipping configuration with appropriate shock and vibration testing
before shipment. Chenbro does not perform shipping tests which cover the complex combination of unique rack offerings and custom
packaging options.
Caution: Exceeding the specified maximum weight limit of a given rail kit or misalignment of the server in the rack may result in
failure of the rack rails, causing damage to the system or personal injury. Two persons to operate or the use of a mechanical assist
tool to install and align the server into the rack is highly recommended.
Available rack mounting kits:
Table 3 Slide rail options
To Next Page
Loading...
