Cheonsei MESTAR+ - SET Components

6
6 Set Components
5-2 Electrode
Specication Remark
Model CPD11
Type Dissolved Oxygen Measurement
Electrode Type Galvanic
Measurement Range 0.00 ~ 20.00 ppm(mg/L)
Velocity which measurement is available 0.35m/s 98
±
0.5%
Temp. Compensation Element Pt 1000Ω
Workable Temp. 0 ~ 60℃
Workable Pressure Max. 1 bar
Reply Time 90% in 2 minutes Based on 25℃
Cable Length 5m
Material ABS
6-1 Standard components
SET Model Components Specication Quantity
MESTAR+
DB0-1
Controller Digital DO Controller 1Set
Panel Bracket SPC-1 M4 x 52mm 2EA
Instruction Manual 24Page 1Copy
Electrode CPD11 1Set
Electrode Holder Standard :
Ø
34

1m, Material : PE 1Set
Braket Holder Material : PVC 1Set
Connection Box
Prevention of Electrostatic Induction Special
lm coating
1Set
Connection cable High Insulation Special Shielded Cable 20m
Buffer Powder Sodium Sulte(Na
2
SO
3
) 15g 1EA
Power Container 500cc, Material : PE 1EA
※ Some components may vary depending on the SET model.
6-2 Optional item

Connection Cable(up to 100m)

Sampling Holder