3
SAFETY INSTRUCTION MANUAL INDEX (REV 12)
I. GENERAL SAFETY AND USAGE
INSTRUCTIONS (ENGLISH) ................................... PAGE 5
II. ALLGEMEINE SICHERHEITS UND
BEDIENUNGSANLEITUNGEN (GERMAN) .................... PAGE 6
III. SÉCURITÉ GÉNÉRALES ET INSTRUCTIONS
D’ UTILISATION (FRENCH) ................................... PAGE 7
IV. ISTRUZIONI GENERALI SULLA
SICUREZZA E L’USO (ITALIAN) ............................... PAGE 8
V. INSTRUCCIONES DE SEGURIDAD
GENERAL Y USO (SPANISH) .................................. PAGE 9
VI. (JAPANESE) .................. PAGE 10
1. INTRODUCTION .............................................. PAGE 11
2. DETERMINE THE AMOUNT OF BACK PRESSURE
THE PLUG MUST WITHSTAND FOR THE JOB OR
APPLICATION ................................................. PAGE 12
3. DETERMINE THE USAGE TEMPERATURE AND THE
MEDIA THE PLUG MUST WITHHOLD ....................... PAGE 16
4. MEASURE THE PIPE AND SELECT THE PROPER
PLUG AND RELATED EQUIPMENT .......................... PAGE 17
5. CLEAN PLUG AND RELATED EQUIPMENT BEFORE
EVERY USE AND INSPECT FOR DAMAGE ................... PAGE 20
6. SELECT AND USE PROPER SAFETY AND
PROTECTIVE EQUIPMENT ................................... PAGE 22
7. RECOMMENDED SAFETY PROCEDURES FOR
ENTRANCE INTO MANHOLES AND OTHER
CONFINED SPACES ........................................... PAGE 24
8. CLEAN PIPE BEFORE PLACING PLUG ...................... PAGE 25
9. ATTACH INFLATION HOSE TO ENABLE PLUG
INFLATION AND DEFLATION FROM OUTSIDE
DANGER ZONE ............................................... PAGE 26
To Next Page
Loading...