39
15. SPECIAL CAUTION TO EMPLOYERS AND
CONTRACTORS.
A. ENSURE THIS MANUAL IS KEPT FOR REFERENCE BY CURRENT/
FUTURE PLUG USERS. Employer must ensure that this manual is kept for
reference by the user of Cherne products. For example, this booklet should
be placed in the tool box of the plumber or user. This manual may be freely
copied and distributed or additional copies may be obtained free upon
request from Cherne by calling toll free at 1-800-843-7584.
B. INSTRUCT EMPLOYEES WITH THIS MANUAL ON THE PROPER
USE OF PLUGS AND ALL RELATED EQUIPMENT.
The employer or
contractor has a duty to provide all necessary training on equipment
usage. In addition, the employer or contractor must provide all necessary
safety equipment and training, familiarize users with this manual and the
purchased equipment, and provide copies of this SAFETY INSTRUCTION
MANUAL for use on the job.
C. INSTRUCT EMPLOYEES AND WORKERS IN PROPER SAFETY
PROCEDURES. The employer or contractor has a duty to properly instruct
and ensure compliance with safety procedures and all applicable OSHA,
Federal, State and Local rules.
D. INSTRUCT ALL EMPLOYEES AND WORKERS AS TO POSSIBLE
HAZARDS.
The employer or contractor has a duty to instruct as to possible
hazards that may be encountered on the job, including the magnitude of
the risk. The employer or contractor must inform employees of the proper
methods for safe use of all the equipment including Cherne products and
working in the job environment.
E. INSTRUCT ALL EMPLOYEES AND WORKERS REGARDING
THE DANGERS OF ANY REASONABLY FORESEEABLE MISUSE
OF THE PRODUCT.
The employer or contractor has a duty to provide
such information as set forth in this manual as well as anything else the
employer or contractor is aware of. Such instruction is the contractor’s
or employer’s duty. Should the employer or contractor be aware of such
misuse, Cherne should be so informed.
F. INFORM ALL WORKERS OF THE COMPANY REPRESENTATIVE
WHO IS RESPONSIBLE FOR SAFETY ON THE JOB.
The employer or
contractor must inform all workers who is responsible for safety on the job
and for consultation regarding questions relating to Cherne product use
and other safety considerations.